Water Main Locator

You are here: Products > Pipeline Detection and Tracing

 

Totalscan TS62

Totalscan Water Main Locator The TS62 water main locators are very high powered metal detectors that were specifically designed to locate water mains on the occasions when traditional pipe and cable locating metal detectors have failed. Will work in cluttered areas and at depths where other metal detectors will not work.

 

Saves valuable time and disruption to customers
Able to minimise customer inconvenience by locating the isolating valve, even when the cover is missing.

Deep-seeking and accurate.
Can locate a 100mm (4”) water main at 118cm (46”) and unlike traditional metal detectors will locate valves even when the frame and cover are missing.

Unaffected by temperature changes or power lines.
The Totalscan TS62 water main locator is unaffected by changes in temperature and moisture as well as its proximity to overhead power lines where normal tracing can not be used.
Stable and reliable.
Unlike 'hobby' metal detectors the TS62 does not need constant zeroing or recalibrating. It is designed as a professional tool and is built to last.

Designed with the needs of the operator in mind.
The control unit comes in a leather case with shoulder strap, which allows a natural viewing angle when reading the display. A clear audio warning tone or headphones free the operator from constantly watching the display

Ergonomic design.
The earch head has a long handle for natural operating position and the unit is balanced so that it can held without tiring.

Backed-up by full product support service
All our water instruments have a full one year guarantee on parts and labour.

Highly directional detection field
Unaffected by nearby interfering signals. Simple metal detectors or water valve box detectors / locators simply cannot match this instrument in action.

Unique false signal filtering technology
Eliminates time wasting false signals from cigarette packets and similar metallic litter.

Deep detection range
Can detect inspection covers down to nearly 1 metre, even when obscured by foil packets and similar items buried a few centimetres down, above the cover. The Imp will ignore the litter but will detect the inspection cover.

 

Simply the fastest way to locate water mains !

Often used as a “troubleshooting” metal detectors in conditions where other instruments will not operate.

  • Under overhead power lines
  • If the pipe has been repaired with asbestos or any non metallic
    material which would not carry a transmitted signal
  • When the pipe is completely lost under overhead power lines.
  • For locating valves when the valve box is missing.
  • In a congested situation where the transmitter and receiver could
    not have the required distance between them and the two
    instruments “spoke” to one another over the ground instead of
    through the pipe or cable.

TS62 Water Main Locator

Main Features

  • High quality taut-band moving-coil meter shows signal strength and battery state
  • Loudspeaker with clear audio tone.
  • Socket for headphones (for noisy situations).
  • Loudspeaker/mute switch.
  • Long handled search coil.
  • Leather carrying case for control unit.
  • Built-in high quality rechargeable batteries.
  • Supplied battery charger for 110v AC or 220-240v AC


Performance / dimensions

Approximate detection ranges Dimensions
80mm (3") cast iron main 100cm (39") Main unit 230 x 180 x 100 mm
100mm (4") cast iron main 118cm (46") Search head diameter 22cm
100mm (4") valve only 83cm (33") Weight 850kg
150mm (6") cast iron main 127cm (50") Charger 100 x 75 x 50 mm
Washout/Fire hydrant cover 121cm (47") Shipping info 80 x 26 x 16 cm, 3.4kg
140mm (5½") diameter plate 70cm (27")    

 

   
Steller Technology Low Vision Specialists