AQUASCAN
6500 connects to any laptop PC
The correlator unit connects to the serial port of a
laptop PC and automatically converts the laptop into a powerful,
advanced leak correlator.
AQUASCAN 6500 is very easy
to use
The correlator is supplied with an easy-to-use Windows-compatible
software. After deploying the sensors, the user simply keys in
the distance between the sensors, the pipe material and the pipe
diameter and then starts the correlation.
High locating precision
The measuring resolution of 16,000 points allows a very
accurate pinpointing (locating precision better than 1 cm per
100 m, or 1" per 1,000 ft).
Enhanced performance on
PVC and MDPE pipes
While plastic pipes are often a problem for conventional
correlators, the AQUASCAN 6500 has enhanced capabilities for more
difficult, low noise and low frequency leaks.
Detailed on-screen information
allows to adjust settings
With a simple mouse-click the user can pop-up additional
windows displaying all details of the leak noise and frequency
analysis. This allows the user to fine-tune all the standard settings
to the specific conditions of any measurement, such as the filter
setting to eliminate disturbing ambient noises.
Multi peak suppression eliminates
interfering noise sources
The AQUASCAN 6500 also offers the possibility to suppress any
correlation peak caused by disturbing non-leak sources, such as
water consumption.
Automatic computation of
the sound velocity
The AQUASCAN 6500 is capable of calculating the real
sound velocity of a pipe section where the material or diameter
is unknown.
Large memory
The number of stored correlations is limited only by
the capacity of the hard disk of the laptop. All necessary correlation
data including FFT and coherence is memorized, permitting subsequent
off-site re-correlation of the measurements with new or changed
parameters.
Comprehensive report and
immediate print-out
A comprehensive report of the leak detection can be printed out
on site, including a drawing of the site-plan with just a few
simple mouse-clicks.
Excellent price/performance
ratio
Even with its advanced features and the high performance, the
AQUASCAN 6500 is very affordable and converts any laptop into
a powerful, advanced leak correlator.
.jpg) |
System configuration:
1 AQUASCAN 6500 correlator unit
2 Remote transmitter units
3 Antennae
2 High sensitivity piezo-ceramic sensors
1 Stereo headphones
1 Connecting cable to a 12 V vehicle cigarette lighter
1 100-240 Volt AC adapter
1 AQUASCAN 6500 software
1 Operating manual
1 Year warranty
Optional accessories:
- 2 Hydrophones
- 1 Car roof antenna
|
Technical
Specifications
Pipe
material: |
All
common pipe materials; mixed material mode with unlimited
number of pipe sections |
Sound
velocity: |
User-adjustable sound velocity
table and automatic computation of the real on-site velocity |
Measurement
time: |
3 sec. or more depending on distance
and required accuracy |
Correlation
resolution: |
16,000 points |
Correlation
accuracy: |
1 cm for 100m (1” for 1 ,000
ft) |
Correlation
method: |
16 bit amplitude correlation |
Filter: |
Automatically selected, manually
infinitely adjustable
|
Frequency
analysis: |
FFT, coherence and user-defined
frequency bands |
Frequency
response: |
1-5000 Hz |
Peak
suppression: |
unlimited, user-selectable |
Sensors: |
Extremely sensitive piezo-ceramic
sensors with magnetic pipe fixing, sensitivity 10 V/g |
Memory: |
includes FFT and coherence data to enable post-processing
of correlation with altered parameters |
Reporting: |
Full report of all measurement
data, including manual drawing of site conditions |
Power: |
Rechargeable 12 V battery |
Battery
charging: |
Vehicle or indoor |
Battery
charge life: |
16 hours |
Interfaces: |
RS 232, sockets for antenna, battery
charger and headphones |
Dimensions: |
Correlator and transmitter units:
22 x 19 x 9 cm (8.8 x 4.8 x 3.6")
Sensors: 4.5 x 13 cm diameter (1.8 x 5" diameter) |
Weight: |
Correlator and transmitter units:
2.7 kg (5.9 lb.)
Sensors: 0.75 kg (1.6 lb.) |
|
